Interlux Nautical ProGuard Black Ablative Antifouling Paint - Gallon NAU993-1

Description

Other
Interlux Nautical ProGuard Black Ablative Antifouling Paint - Gallon NAU993-1
Product SKU:
ILX-NAU993-1
Item Condition:
New
MSRP
{{detail_product_description}}.00
Sale Price
5.90
Product Description:
Interlux Nautical ProGuard Ablative is performance, value and reliability all in one. ProGuard Ablative is an all-purpose, low V.O.C. antifouling paint formulated to erode away with use reducing paint build-up. ProGuard Ablative provides season-long protection in moderate to high fouling waters and can be applied directly over most properly prepared antifouling paints. Recommended for use on the underwater areas of fiberglass, wood, and properly primed metal (except aluminum) boat hulls and can be used in fresh, salt and brackish waters.
Reliable performance at an excellent value
Reduced paint build-up
Season-long protection in moderate to high fouling waters
Compatible over most antifouling paints
Low V.O.C.
Specifications:
Finish:
Matte
Coverage:
455 sq. ft/gal
Number of Coats:
2 coats, 3 on bare wood
Application Method:
Brush, roller, airless and conventional spray
Do not use on aluminum
***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***
How to Apply
APPLICATION DATA METHOD
: Airless Spray, Brush, Conventional Spray, Roller
NUMBER OF COATS:
2, 3 on bare wood
DRY FILM THICKNESS PER COAT:
2 mils (3.6 mils wet)
COVERAGE:
455 sq. ft/gal.
APPLICATION TEMP:
41°F Min. / 95°F Max.
THINNER:
Thin 10% wuth Xylene. Do not exceed 10 % by volume.
DRY TIMES:
Temp
To Touch
To Recoat
To Launch
95°F
1 HR
8 HR
8 HR
73°F
2 HR
12 HR
12 HR
50°F
3 HR
16 HR
16 HR
PREVIOUSLY PAINTED SURFACES - GOOD CONDITION:
Remove all traces of loose paint by sanding the entire surface with 80 grit wet-or-dry sandpaper; wipe surface clean with Xylene¹ using the two-rag method before and after sanding. Apply two coats of ProGuard Ablative allowing for appropriate dry times.
PREVIOUSLY PAINTED SURFACES - POOR CONDITION:
Completely remove old antifouling paint, after all old antifouling paint has been completely removed, sanding  the entire surface with 80 grit wet-or-dry sandpaper; wipe surface clean with Xylene¹ using the two-rag method before and after sanding. Apply two coats of ProGuard  Ablative allowing for appropriate dry times.
BARE FIBERGLASS:
scrub the surface thoroughly with a stiff brush using soap and water. Flush with fresh water to remove the soap residue and allow surface to dry. Remove mold release wax and surface contamination by wiping down the surface with Xylene¹ using the two-rag method. Fill any surface imperfections with   approved filler for underwater use. Sand the entire surface with 80-grit sandpaper until a flat matte finish is obtained. Wipe the sanding residue off the surface with Xylene¹ using the two-rag method. Apply two coats of ProGuard Ablative allowing for appropriate dry times.
BARE WOOD:
Sand the entire surface with 80 grit wet-or-dry sandpaper; wipe surface clean with Xylene¹ using the two-rag method before and after  sanding. Apply the first coat of ProGuard Ablative thinned 10% with Xylene². Apply two finish coats of ProGuard Ablative allowing for appropriate dry times
UNDERWATER METALS:
Apply an approved underwater metal primer as per manufacturer’s instructions. Apply two coats of ProGuard Ablative allowing for appropriate dry times.
Do not use on aluminum
APPLICATION METHODS:
Mixing: Stir well before use.
Cleaner: Acetone or Xylene¹
Thinning: Thin 10% with Xylene² Do not exceed 10% by volume.
Ventilation and Humidity Control: Apply in dry, well ventilated conditions.
Roller: Use a 3/8" nap solvent resistant roller.
Airless Spray: Tip Size: 0.53-0.66 mm/21-26 thou. Pressure: 170-204 bar/2500-3000 psi.
Conventional Spray: Pressure Pot: Tip Size: 1.8-2.2 mm/70-85 thou. Pressure: 4.08-4.76
bar/60-70 psi (gun pressure); 10-15 psi (pot pressure).
About Us
Wholesale Marine is an on line boating store founded to provide customers an easy way find top-quality products at the lowest prices. With associates who possess decades of combined boating experience, Wholesale Marine can truly provide expert customer service.
Shipping Method
Wholesale Marine currently ships all merchandise UPS or truck freight. All orders with in-stock items placed by 2:00 PM EST Monday - Friday are shipped that same day. Orders placed after 2:00 PM on Friday and orders place on Saturday and Sunday will ship on the following Monday. Orders that qualifying for free shipping may be shipped  any method and carrier chosen by Wholesale Marine.  Free shipping offers are only valid within the continental U.S.
There are certain items that we cannot ship outside of the Continental United States. Items that cannot be shipped outside of the Continental United States include all name brand watersports products and hazardous materials, such as but not limited to paint, oil, resins and adhesives.
*Canadian Customers: Please be aware that any brokerage, duty, or customs fees are out of our control.
Returns
Wholesale Marine will gladly refund almost any merchandise within 30 days from original purchase date. To return just send merchandise prepaid, in its original unused condition. Please include a copy of original Wholesale Marine invoice. We will then refund the merchandise amount by the original payment method. Shipping costs are not refundable. No returns for special order items, electronics, cut lengths of material or hazardous materials, such as but not limited to paint, oil, resins and adhesives.
Please ship all Returns to:
Wholesale Marine
147 Circle Freeway Drive
Cincinnati, OH 45246
Connect with Us
Find us on:
Powered by SixBit's eCommerce Solution